Hyundai Creta: Rear Door / Rear Door Inside Handle: Repair procedures

Hyundai Creta GS 2014-2019 Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Inside Handle: Repair procedures

Replacement

1.	Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim")

2.	After loosening the mounting screws, then remove the rear door inside handle (A).

To install, reverse the removal procedure.

•	Make sure the door locks/unlocks and opens/closes properly.

•	Replace any damaged clips.

Rear Door Trim

Components and components location Component Location 1. Rear door trim Repair procedures Replacement ...

Rear Door Window Glass

Components and components location Component Location 1. Rear door window glass Repair procedures Replacement 1. Pul ...

Other information:

Hyundai Creta GS 2014-2019 Service Manual: Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect injector connector. 3. Measure resistance between injector terminals 1 and 2. 4. Check that the resistance is within the specif ...

Hyundai Creta GS 2014-2019 Service Manual: Specifications
Specifications Smart Key Unit Items Specification Rated voltage DC 12V Operating voltage DC 9 ~ 16V Operating temperature -22°F ~ 167°F (-30°C ~ 75°C) ...