Hyundai Creta: Automatic Transaxle System / Automatic Transaxle Control System
Hyundai Creta GS 2014-2024 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System
- Description and operation
- Components and components location
- Schematic diagrams
- Repair procedures
- Transaxle Control Module (TCM)
- Transaxle Oil Temperature Sensor
- Input Speed Sensor
- Output Speed Sensor
- Torque Converter Control Solenoid Valve (T/CON_VFS)
- 26 Brake Control Solenoid Valve (26/B_VFS)
- Line Pressure Control Solenoid Valve
- 35R Clutch Control Solenoid Valve (35R/C_VFS)
- Underdrive Brake Control Solenoid Valve (UD/B_VFS)
- Overdrive Clutch Control Solenoid Valve (OD/C_VFS)
- SS-A Solenoid Valve (ON/OFF)
- SS-B Solenoid Valve (ON/OFF)
- Inhibitor Switch
- Shift Lever
- Shift Cable
Oil Cooler
Components and components location
Components Location
1. ATF cooler
2. ATF cooler hose
3. Clamp
4. Automatic transaxle
Repair procedures
...
Description and operation
Description
•
Automatic transaxle system relies on various measurement data to determine
the current control status and extrapolate the necessary compensation
...
Other information:
Hyundai Creta GS 2014-2024 Service Manual: Front Seat Assembly
Components and components location
Component Location
1. Front seat assembly
Repair procedures
Replacement
1.
Open the front seat mounting bolt cap (A), then loosen the mounting
bolts (B).
...
Hyundai Creta GS 2014-2024 Service Manual: Front Impact Sensor (FIS)
Description and operation
Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They
are remote sensors that detect acceleration due to a collision at its mounting
location. The primary purpose of the Front Impact Sensor (FIS) is to provide
a ...
© 2017-2024 www.hcrmangs.com
